MX2M-4HDMI20-OB
HDMI 2.0 Output Board
Highlighted features
- HDCP 2.3 and HDCP 1.4 support with cross conversion capabilities
- DisplayID support for forcing extreme formats (e.g. 7kx1k@60Hz 4:4:4) from the connected source
- Hot-swap support
- HDMI 2.0, HDMI 1.x, and DVI compatible
- CEC support (command injection)
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- No signal latency, zero frame delay
The MX2M-4HDMI20-OB is a HDMI 2.0 compatible output board for the MX2M modular matrix family. The hot-swappable output board has four HDMI connectors of type A, all with flange, allowing easy installation and operation on a wide range of applications where flexibility and versatility are key concerns.
Pass-through of embedded audio including uncompressed (LPCM, DSD), compressed (MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES) and HBR (Dolby Atmos, Dolby TrueHD, DTS-HD DA) formats.
Embedding of uncompressed (2-channel LPCM) and compressed (MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES) formats from the Audio Layer into the output HDMI stream.
All outputs are HDMI 2.0 compliant and can pass HDMI signals with a pixel clock frequency of up to 600 MHz, allowing signal transmission with a maximum resolution of 4K UHD @ 60Hz 4:4:4.
The board can replace the audio in all four routed HDMI signals with compressed or LPCM audio streams from the audio layer.
- HDCP 2.3 and HDCP 1.4 support with cross conversion capabilities
- DisplayID support for forcing extreme formats (e.g. 7kx1k@60Hz 4:4:4) from the connected source
- Hot-swap support
- HDMI 2.0, HDMI 1.x, and DVI compatible
- CEC support (command injection)
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- No signal latency, zero frame delay
| Video | |
| Resolution | Up to UHD/4k@60Hz 4:4:4 (with support for extreme formats e.g 7kx1k by |
| Signal Type | HDMI 2.0, HDMI 1.x, DVI |
| Maximum data rate | 18 Gbps |
| Maximum pixel clock | 600 MHz |
| Content protections | HDCP 1.x, HDCP 2.2, HDCP 2.3 |
| Connector type | 4x HDMI receptacle type A with and without flange |
| Video processing | Signal parameter measurement |
| Standards | HDMI 2.0, HDMI 1.4, DVI |
| Audio |
||
| Audio mode | Simultaneous pass-through and de-embedding to the Audio layer | |
| Supported audio formats for pass-through | All HDMI2.0 audio formats | |
| Supported audio formats for de-embedding | Uncompressed | LPCM (up to 8 channels, 192 kHz, 24 bits per sample) |
| Compressed | MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digtal, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES | |
| Compressed HBR | - | |
| General | ||
| Powering | via MX2M frame | |
| Power consumption (max) | 11 W | |
| Thermal dissipation (max) | 37,5 BTU/hr | |
| Weight | TBD | |
| Operating conditions | Ambient temperature | 0-50oC |
| Relative humidity | 0-90% (non-condensing) | |
| Transportation conditions | Ambient temperature | -20-70oC |
| Relative humidity | 0-95% (non-condensing) | |
| Complience | EN 55032:2015 IEC 61000-3-3:2013+AMD1:2017 IEC 61000-3-2:2018 FCC CFR Title 47, Part 15, Subpart B |
|
| Warranty | 3 years | |